Friday, October 21, 2011

Chalk it up to Magnetism!

I'm just tickled pink with this one, it's so versatile. It's a chalk and magnet board. It can be used as a countdown board, a menu board, a caption board. The photo corners are attached to magnets so the sign or photo is lifted away from the board about 1/4 of an inch. The American Crafts Chalk Paper is included in the October 2011 Club Ruby Designers' kit.

Board
Step 1. Cut a 12" x 12" square out of foamboard and paint it black. I didn't cut it with my Cricut by the way, it's just where I photographed it.

Step 2. Glue on galvanized tin step flashing. I used several sheets. I didn't go all the way to the edges because I wanted to make sure the paper was attached to the foam board around the edge.

The leftovers are very useful, so don't throw them out. None of my local hardware stores sold this, so I had to order it online. If you are shopping locally, it's helpful to carry a magnet with you to test for magenetism. Just don't carry it next to your credit cards, or other things that are affected :D.

Step 3. Glue on the Chalk Paper.

Step 4. Attach a hanger. I made one out of two pieces of grungeboard with holes for the string and attached them to the back of the foamboard with Beacon's 3 in 1 Advanced Craft Glue.

Magnetic Photo Corners

Step 1.  Cut cardstock into 2 1.5" x 1.5" squares.

Step 2. Fold in half as shown.

Step. 3. Fold in half in the other direction.

Step 4. Open and apply glue in 1 quarter of the square and fold in half. If you glue more than a quarter, there won't be a pocket to stick the sign in.

Step 5. Apply glue to 1 quarter of the square. Attach magnet to back.

Supplies:
American Crafts Chalk Paper
ProMag Magnets
Galvanized Tin Step Flashing (used for roofing, but don't get the aluminium that is also used).
Foam Board Black Acrylic Paint